We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Air Locker AP700 Manual: How to Read, Use and Maintain Yours

Need the air locker AP700 manual explained? Learn where to find it, how to read the key sections, and the basic steps for operating and maintaining your locker.

Updated November 2026

An air locker AP700 manual walks you through how the locker is wired, how to engage and release it, and what routine checks keep it reliable on the trail. If you have the manual in hand, you can use this guide to find the sections that matter most and turn them into a simple setup and maintenance routine. Work through the steps below before your first trip with the locker engaged.

Find the Right Manual and Check It Matches Your Locker

Start by confirming you have the correct document for your hardware. Compare the part number on the locker or actuator against the number printed on the manual’s cover or first page. Using a manual for a different locker model can lead to wrong wire colors and incorrect pressure values.

Shopping for one? See our guide: ARB Air Locker Differential Review (2026).

If the printed copy is missing, the manufacturer’s website and dealer support pages usually host current PDFs. Save a digital copy and a printed one in the glovebox. For a broader view of how these systems work before you read the specifics, the article What Is an ARB Air Locker? How It Works and When to Use One explains the core layout.

Read the Key Sections Before You Touch Anything

Most air locker manuals group their content the same way. Focus on these parts first:

  • Specifications: operating air pressure, solenoid voltage, and compressor requirements.
  • Wiring diagram: identifies the switch, power feed, ground, and solenoid connections.
  • Operation: describes the engage and disengage sequence and any warnings about driving in locked mode.
  • Maintenance: lists inspection intervals, air line checks, and fluid or seal notes.

Read the warnings twice. Manufacturers specify limits on when the locker should be engaged, especially on pavement, and those limits exist to protect the axle and drivetrain.

Operate the Locker Following the Manual’s Sequence

Once you understand the layout, follow the operating steps in order. Skipping a step is the most common way owners end up with a locker that will not engage or disengage cleanly.

  1. Park on level ground, with the transmission in neutral or park and the parking brake set.
  2. Confirm the air supply is at the pressure listed in the specifications section.
  3. Activate the switch and wait for the indicator light, if equipped, to confirm engagement.
  4. Drive slowly and avoid tight, low-traction turns while the locker is engaged.
  5. Disengage the locker on pavement and check that the indicator returns to its off state.

Set Up a Routine Maintenance Schedule

The maintenance section usually recommends periodic checks of air lines, fittings, and the solenoid connections. Build these into your regular service rather than waiting for a fault. Look for cracked hose, loose clamps, and corrosion on electrical terminals, and tighten or replace anything that shows wear. Mount the compressor and air tank securely so vibration does not work loose the fittings over time.

Tools and Items to Keep on Hand

  • Digital tire or gauge capable of reading the specified operating pressure
  • Multimeter for checking solenoid voltage and continuity
  • Spare fuses matching the rating in the wiring diagram
  • Dielectric grease for sealing exposed connectors

Common Mistakes

  • Using a manual for a different locker or model year.
  • Engaging the locker on pavement or during tight turns.
  • Ignoring a slow or uneven engagement, which often points to a small air leak.
  • Forgetting to check electrical connections after off-road travel.
  • Skipping the pressure check before each trip.

A tire gauge that reads the operating range listed in your manual makes pressure checks quick and repeatable. Look for a digital unit so you can read small changes that a basic dial may hide. View on Amazon

A basic multimeter lets you confirm power and ground at the solenoid before you suspect the locker itself. It is one of the fastest ways to narrow down an electrical fault. View on Amazon

Dielectric grease protects exposed connectors from moisture and corrosion, which is especially useful on a vehicle that sees water crossings. View on Amazon

FAQ

Where can I find an air locker AP700 manual?

Check the packaging, the manufacturer’s support pages, or your dealer. Confirm the part number on the manual matches the one on your locker before relying on it.

How often should I check the locker’s air system?

Manuals typically recommend inspecting lines and connections at regular service intervals and before extended off-road trips. Follow the schedule in your own manual, since intervals can vary.

What should I do if the locker engages slowly?

A slow or uneven engagement often points to an air leak or low supply pressure. Check the pressure, inspect fittings for leaks, and consult the troubleshooting section of your manual or a qualified technician if the problem continues.

Conclusion

An air locker AP700 manual is most useful when you read the specifications, wiring, and operating sections before your first drive. Follow the engagement sequence exactly, and set up a regular check of air lines and electrical connections. Consult a qualified technician for any repair beyond routine inspection.

Graham Fisher

About Graham Fisher

Graham Fisher is part of our editorial team and reviews and edits our off-road vehicle upgrades guides, checking product details against manufacturer specifications and owner feedback.

About the author

Graham Fisher
Graham Fisher

Graham Fisher writes reviews and buying guides for Offroad Lockers.