We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Can-Am Rear Differential Locker: Types, Fit and Install Steps (2026)

Learn how a Can-Am rear differential locker works, which types fit your side-by-side or ATV, and the install steps to get more traction on the trail.

Updated November 2026

A Can-Am rear differential locker forces both rear wheels to turn at the same speed, which gets you through mud, sand and rocky climbs when one wheel loses grip. This guide covers the main locker types, how to confirm fitment for your model, and the install steps you will follow. Plan on working with a service manual for torque values and fluid specs, since those vary by model year.

Know Your Locker Types Before You Buy

Most aftermarket lockers for Can-Am rear ends fall into two groups. A fully locked (spool-style) unit makes both axle shafts turn together every time, which gives maximum traction but can cause hard steering and driveline stress on pavement. A selectable or electronically actuated locker lets you engage it on demand, so you can run open on hardpack and lock it for the obstacle. An automatic or limited-slip design sits in between, sending torque to the wheel with grip without a dedicated switch.

Shopping for one? See our guide: 3 Best Tacoma Rear Differential Locker Options for Trail Use (2026).

For most trail riders, a selectable locker gives the best balance. Owners often report that fully locked setups feel unpredictable on tight turns, especially on machines with a short wheelbase.

Confirm Fitment for Your Model

Check your model year, axle type and ring gear size before ordering. Can-Am rear differentials have changed across generations, and a locker built for one housing may not bolt into another. Match the part number to the ring gear tooth count and the spline count on the axle shafts. If you are unsure, the manufacturer’s parts diagram or a dealer parts lookup by VIN is the safest starting point.

If you also run a front locker, verify that the front and rear units are compatible with your gearing and tire diameter. Mismatched tire sizes can load the driveline even when the locker itself is correct. For a broader look at how these units compare across platforms, see What Is an E Locker Differential? How It Works and When to Use One.

Install Steps for the Rear Locker

Work on a level surface with the machine secured on jack stands rated for the load. Drain the rear differential fluid into a pan before you start, and keep the old fluid in case you need to check it for metal debris.

  1. Remove the rear wheels and brake components as needed to access the axle shafts.
  2. Loosen and remove the axle shafts, marking their orientation so they go back in the same way.
  3. Pull the differential cover and carrier assembly according to your service manual.
  4. Remove the factory spider gears and side gears, then press or slide in the locker per the kit instructions.
  5. Check ring gear backlash and bearing preload with a dial indicator. Adjust shims until the readings match the spec.
  6. Install a new cover gasket, reinstall the carrier, and torque bolts in a star pattern to the listed value.
  7. Refill with the specified gear oil to the correct level, then test engagement in a safe area.

Tools and Supplies Checklist

  • Torque wrench with a metric range suited to differential fasteners
  • Dial indicator and magnetic base for backlash checks
  • Gear oil matching the manufacturer’s viscosity and friction-modifier spec
  • New cover gasket or RTV sealant as the service manual allows
  • Jack stands, floor jack and drain pan

Common Mistakes to Avoid

  • Skipping the backlash check, which can wear the ring and pinion quickly.
  • Reusing a damaged gasket and finding a leak after the first trail run.
  • Using a gear oil without the correct friction modifier for a limited-slip or locker unit.
  • Overtightening cover bolts, which can warp the housing face.
  • Engaging the locker at speed or while turning hard on pavement.
  • Torque wrench set helps you hit the bolt specs on the cover and carrier without guessing. View on Amazon
  • Dial indicator with magnetic base lets you measure ring gear backlash accurately during setup. View on Amazon
  • Synthetic differential gear oil matches the viscosity most lockers require for long service life. View on Amazon

FAQ

Will a rear locker make my Can-Am harder to steer?

A fully locked rear can make tight turns on pavement feel stiff or skippy. A selectable unit avoids this because you can keep it open for street or hardpack use.

Do I need to change the gear oil after installing a locker?

Yes, in most cases. Use the viscosity and additive package the locker or the service manual specifies, and check the level after the first few rides.

Can I install a rear locker without a shop?

Many owners do it with basic hand tools, a dial indicator and a service manual. If you are not comfortable setting backlash and preload, have a qualified technician check the work.

Conclusion

A rear locker can transform how your Can-Am handles on obstacles, but the result depends on choosing the right type and fitting it correctly. Confirm your model’s specs, follow the service manual for setup, and test the locker on a safe surface before heading into rough terrain.

Graham Fisher

About Graham Fisher

Graham Fisher is part of our editorial team and reviews and edits our off-road vehicle upgrades guides, checking product details against manufacturer specifications and owner feedback.

About the author

Graham Fisher
Graham Fisher

Graham Fisher writes reviews and buying guides for Offroad Lockers.